DPV-35: 118-136 MHz Ground to Air Antenna |
|
|
|
| Frequency Range | 118-136 Mhz |
| VSWR | 2.0:1 Max |
| Maximum Power Input | 100 Watts Continuous |
| Number Of Inputs | 1 |
| Polarization | Vertical |
| Impedance | 50 Ohms |
| Azimuth Pattern | Omni-Directional, plus or minus 1 dB |
| Minimum Elevation Beamwidth | 65 degrees |
| Elevation Beam Maximum Location | Horizon, plus or minus 10 degrees |
| Minimum Power Gain | 0 dBi |
| Minimum Isolation | N/A |
| Environmental Conditions | 100 MPH wind with 0.5 inches of radial ice |
| Shipping Weight, lbs | 4.5 |
| Overall Length | 51.5 inches |
| Radome Diameter | 2.35 inches |
| Equipment Supplied | UG-1185 mating connector, a base adapter to allow mounting to a 1.25 Or 2.5 IPS Pipe, .375-16 stainless steel mounting bolts, and a grounding lug |
| Radome Material | The radome is filament wound epoxy fiberglass that exhibits superior environmental capabilities. |
| Mounting Configuration | The DPV-35 is designed for coaxial mounting on the end of a 1.25 Or 2.5 IPS pipe. The input connector is sheltered from the environment. |
| Finish | The standard finish is gray polyurethane paint on all exterior surfaces. Other colors or finishes are available upon request. |
