|
SPECIFICATION |
PERFORMANCE
|
|
Number of Inputs |
2 |
|
Frequency Range |
118-136 MHz & 118-136 MHz |
|
Maximum VSWR |
2.0:1 |
|
Input Impedance |
50 Ohms |
|
Maximum Power |
100 Watts Each Input |
|
Azimuth Patterns |
Omni, plus or minus 1 dB |
|
Minimum Elevation Beam Width |
65 Degrees |
|
Elevation Beam Maximum Location |
Horizon, plus or minus 10 Degrees |
|
Minimum Power Gain |
0 dBi |
|
Minimum Isolation |
30 dB |
|
Environmental Conditions |
100 MPH wind with .5 inches of radial ice |
|
Shipping Weight |
14 pounds |
|
Overall Length |
142.25 inches |
|
Radome Diameter |
2.35 inches |
|
Equipment Supplied |
UG-1185 mating connectors, .375-16 stainless
steel mounting bolts, and a grounding lug. |
|
Mounting Configuration |
The DPV-36 is designed for coaxial mounting
on the end of a 2.5 inch IPS pipe. The input connectors are sheltered
from the environment. |
|
Radome Material |
The radome is filament wound epoxy fiberglass
that exhibits superior environmental capabilities. |
|
Finish |
The standard finish is gray polyurethane paint
on all exterior surfaces. Other colors of finishes available
upon request. |
|
RF Characteristics |
Two vertically polarized dipoles integrated
into one radome. The dipoles are mounted one above the other
and maintain 30 dB isolation at the same frequency. All metallic
part of the antenna are at DC ground potential. |
