|
SPECIFICATIONS |
PERFORMANCE |
|
Number of Inputs |
1 |
|
Frequency Range |
400-500 MHz |
|
Maximum VSWR |
2.0:1 |
|
Input Impedance |
50 Ohms |
|
Maximum Power |
100 Watts |
|
Azimuth Patterns |
Omni, plus or minus 1 dB |
|
Minimum Elevation Beam Width |
65 degrees |
|
Elevation Beam Maximum Location |
Horizon, plus or minus 10 degrees |
|
Minimum Power Gain |
0 dBi |
|
Minimum Isolation |
N/A |
|
Environmental Conditions |
100 MPH wind with .5 inches of radial ice |
|
Shipping Weight |
4 pounds |
|
Overall Length |
24 inches |
|
Radome Diameter |
2.35 inches |
|
Equipment Supplied |
UG-1185
mating connector, a base adapter to allow mounting to a 1 ¼
or 2 ½ IPS pipe, .375-16 stainless steel mounting bolts,
and a grounding lug. |
|
Mounting Configuration |
The DPV-35 is designed for
coaxial mounting on the end of a 1 ¼ or 2 ½ IPS
pipe. The input connector is sheltered from the environment. |
|
Radome Material |
The radome is filament wound epoxy fiberglass
that exhibits superior environmental capabilities. |
|
Finish |
The standard finish is gray polyurethane paint
on all exterior surfaces. Other colors or finishes available
upon request. |
