|
DPV-56A: 400-550 MHz Ground-to-Air Antenna |
|
|
|
| Number of Inputs | 1 |
| Frequency Range | 400-550 MHz |
| Maximum VSWR | 2.0:1 |
| Input Impedance | 50 Ohms |
| Maximum Power | 100 watts |
| Azimuth Patterns | Omni, plus or minus 1 dB |
| Minimum Elevation Beam Width | 25 degrees |
| Elevation Beam Maximum Location | Horizon, plus or minus 10 degrees |
| Minimum Power Gain | 3 dBi |
| Environmental Conditions | 150 MPH wind, 100 MPH with 1.0 inches of radial ice |
| Shipping Weight | 9 pounds |
| Overall Length | 52.5 inches |
| Radome Diameter | 2.35 inches |
| Equipment Supplied | UG-1185 mating connector, a base adapter to allow mounting to a 1 ¼ or 2 ½ IPS pipe, .375-16 stainless steel mounting bolts, and a grounding lug. |
| Mounting Configuration | The DPV-56A is designed for coaxial mounting on the end of a 1 ¼ or 2 ½ IPS pipe. The input connector is sheltered from the environment. |
| Radome Material | The radome is filament wound epoxy that exhibits superior environmental capabilities. |
| Finish | The standard finish is gray polyurethane paint on all surfaces. Other colors or finishes available upon request. |