|
DPV-74A 400-625 Mhz Ground-to-Air Antenna |
|
|
|
| Number of Inputs | 1 |
| Frequency Range | 400-625 Mhz |
| Maximum VSWR | 1.7:1 |
| Input Impedance | 50 Ohms |
| Maximum Power | 3200 Watts |
| Azimuth Patterns | Omni, plus or minus 1 dB |
| Minimum Elevation Beam Width | 65 Degrees |
| Elevation Beam Maximum Location | Horizon, plus or minus 10 degrees |
| Minimum Power Gain | 0 dBi |
| Minimum Isolation | N/A |
| Environmental Conditions | 140 MPH wind with .5 inches of radial ice |
| Shipping Weight | 15 pounds |
| Overall Length | 27 inches |
| Radome Diameter | 13.0 inches |
| Radome Material | The radome is a mat epoxy fiberglass that exhibits superior environmental capabilities. |
| Finish | The standard finish is green CARC paint on all exterior surfaces. Other colors or finishes available upon request. |
| RF Characteristics | The DPV-74A is designed for high power UHF applications and is a vertically oriented dipole that is fed through the center of the lower half of the dipole. All parts of the antenna are at DC ground potential. The fiberglass radome provides both mechanical stability and environmental protection. The radome is capable of being pressurized through the coaxial interface to 10 PSI under all environmental conditions. |