|
DPV-85:
225-400, 225-500, 225-400, 225-400
and 225-400 MHz |
|
|
|
|
| Number of Inputs | 5 | |
| Frequency Range | 225-400, 225-500, 225-400, 225-500 & 225-400 MHz | |
| Maximum VSWR | 2.0:1 | |
| Input Impedance | 50 Ohms | |
| Maximum Power | 100 watts CW each input | |
| Azimuth Patterns | Omni, plus or minus 1 dB | |
| Minimum Elevation Beam Width | 35 degrees | |
| Elevation Beam Maximum Location | Horizon, plus or minus 10 degrees | |
| Power Gain | -1 to +1 dBi | |
| Minimum Isolation | 30 dB | |
| Environmental Conditions | 120 MPH wind with 160 MPH gusts without guy wires | |
| Weight | 335 pounds | |
| Overall Length | 374 inches | |
| Radome Diameter | 10.5 inches tapers to 6.3 inches | |
| Equipment Supplied | UG-1185 mating connectors | |
| Mounting Configuration | The DPV-85 is designed for flange mounting with 4 each 1.0 inch diameter bolts on a 11.5 inch BC. | |
| Radome Material | The radome is filament wound epoxy fiberglass that exhibits superior environmental capabilities. | |
| Finish | CARC paint | |
| RF Characteristics | Five vertically polarized dipoles integrated into one radome. The dipoles are mounted one above the other and maintain 30 dB isolation at the same frequency. All metallic parts of the antenna are at DC ground potential. | |
